 |
|---|
 |
The Thermaco, Inc. Trapzilla® Supercapacity Grease Trap collects free-floating (non-emulsified) grease & oils contained in kitchen drain water flows. Grease buildup inside a building’s grease containment system is a major cause of problems due to exterior drain line blockages. These problems jeopardize normal operations as well as create health and safety hazards within the facility itself. Proper installation of a Trapzilla® Supercapacity Grease Trap can reduce or eliminate grease problems. Use of a Trapzilla system assures minimization and/or elimination of costly sewer surcharges and fines through efficient separation and retention of free-floating grease & oils. Trapzilla ECA-160 Extension Collar Installation Instructions |
|---|
Trapzilla TZ-160 Supercapacity Grease Trap System
-
Offers a flat grease separation curve.
-
Constructed of corrosion resistant materials suitable for installation in virtually any location.
-
Compact footprint.
Thermaco Trapzilla TZ-160 Grease Trap System, rotationally molded polyethylene grease and oil separator for below or above-ground installation, rated at 35 gallons (2.21 l/s) per minute peak flow, 160+ pounds (72.57+ kg) of grease storage capacity, flat grease separation curve, integral portal for access by grease pump truck for grease removal, integral portal for vacuum access for removal of solids, and including as an integral part of the unit a vessel vent, an integral gas trap, a fully removable foam-filled polyethylene cover, and two (2) no-hub connectors for plumbing connection provided.
Trapzilla TZ-160 Support Stand
Trapzilla TZ-160 Specification Sheets
Product Information
Grease Retention Capacity: 160+ Pounds (72.57+ kg)
Material: Rotationally Molded Polyethylene
Product Images
 |
 |
 |
|---|
Trapzilla TZ-400 Supercapacity Grease Trap System
-
Offers a flat grease separation curve.
-
Constructed of corrosion resistant materials suitable for installation in virtually any location.
-
Compact footprint.
Thermaco Trapzilla TZ-400 Grease Trap System, rotationally molded polyethylene grease and oil separator for below or above-ground installation, rated at 75 gallons per minute peak flow, 400+ pounds of grease storage capacity, flat grease separation curve, integral portal for access by grease pump truck for grease removal, integral portal for vacuum access for removal of solids, and including as an integral part of the unit a vessel vent, an integral gas trap, a fully removable foam-filled polyethylene cover, and two (2) no-hub connectors for plumbing connection provided.
Trapzilla ECA-400/600 Extension Collar Installation Instructions
Product Information
Maximum Inlet Flow Rate: 75 GPM (4.73 l/s)
Grease Retention Capacity: 400+ Pounds (181+ kg)
Material: Rotationally Molded Polyethylene
Product Images
 |
 |
 |
|---|
We Also Recommend:
 |
 |
 |
|---|---|---|
| Trapzilla Supercapacity Grease Trap SSA-400/600 Support Stand. Support Stand is a two-piece construction with a center conical module that sits on the floor. It does not add appreciable height to the assembly. | Trapzilla Supercapacity Grease Trap ECA-400/600 Extension Collar. Extension Collar allows for field modification for installation into in-ground locations. | Trapzilla Supercapacity Grease Trap ECA-400/600 Extension Collar. Extension Collar allows for field modification for installation into in-ground locations. |
Trapzilla TZ-600 Supercapacity Grease Trap System
-
Offers a flat grease separation curve.
-
Constructed of corrosion resistant materials suitable for installation in virtually any location.
-
Compact footprint.
Thermaco Trapzilla TZ-600 Grease Trap System, rotationally molded polyethylene grease and oil separator for below or above-ground installation, ASME A112.14.3 rated at 75 gallons per minute and factory rated at 150 gallons per minute peak flow, 600+ pounds of grease storage capacity, flat grease separation curve, integral portal for access by grease pump truck for grease removal, integral portal for vacuum access for removal of solids, and including as an integral part of the unit a vessel vent, an integral gas trap, a fully removable foam-filled polyethylene cover, and two (2) no-hub connectors for plumbing connection provided.
Product Information
ASME A112.14.3 (Tested) Flow Rating: 75 GPM (4.73 l/s)
Manufacturer Rated Inlet Flow Rating: 150 GPM (9.46 l/s)
Grease Retention Capacity: 600+ Pounds (272.16+ kg)
Material: Rotationally Molded Polyethylene
Trapzilla ECA-400/600 Extension Collar Installation Instructions
Product Images
 |
 |
 |
|---|
We Also Recommend:
|
|
|
|---|---|---|
| Trapzilla Supercapacity Grease Trap SSA-400/600 Support Stand. Support Stand is a two-piece construction with a center conical module that sits on the floor. It does not add appreciable height to the assembly. | Trapzilla Supercapacity Grease Trap ECA-400/600 Extension Collar. Extension Collar allows for field modification for installation into in-ground locations. | Trapzilla Supercapacity Grease Trap ECA-400/600 Extension Collar. Extension Collar allows for field modification for installation into in-ground locations. |
|
|
||||||
|
